I dunno if it can be the socket on the board or if a new charging part can solve it. Includes the flex cable, logic board connector, lightning connector socket, and one microphone. Sometimes after a long pushing it seems to be attached and it charges but after some minutes or hours it seems to not work again. Replace a lightning connector assembly compatible with an iPhone 12 mini. I did tons of tests with the new part and the old one and it seems like I’ve to hold pushing a precise point on the flex socket to make it works, if I leave it doesn’t work. I checked for solutions and tried some but nothing, then I understood it was the charging flex cable not good pressed into the socket. I bought the part and I connected it to test and it seemed the charging was back without the accessory error, so I replaced the part but when I turned on the phone it was in boot loop. After all I went for charging port replacement. I thought a battery replacement could solve it but nothing. Includes the flex cable, logic board connector, lightning connector socket, and two microphones. I tried the easy solutions to solve it like cleaning the port, restoring the phone and so on but nothing. Replace a lightning connector assembly compatible with the iPhone 8. At that time I used a compatible charger (I used for much time), so I swapped to an original one but the problem persisted. Replace a lightning connector, two microphones, and cellular antenna compatible with the iPhone 7 Plus. One day my iPhone 7 started annoying me saying that the accessory was not supported when I put charger in.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |